Hitch Mounted Barbed Wire Unroller
$235.00
PLEASE NOTE: This item is on back order if you place an order we will add you to the list and it will ship once it become available. This item is on high demand, so place your order and ships when it becomes available. Current date for availability is October 15, 2021 but may ship out sooner. Dates are subject to change.
Barbed Wire Unroller is 2” receiver hitch compatible and used for fencing projects. This all-purpose wire unroller features safety pins that prevent the rod from disconnecting when in use. The wire unroller attachment holds 1 roll up to 80 rod or 1,320 ft of barbed wire and is perfect for running fence lines big or small. The frame is reinforced with a steel gusset and made from square tubing. The wire unroller is designed to fit into your truck’s 2” receiver or on a receiver mount plate attached to your tractor. We also provide an adapter to allow you to bolt to the rear of your ATV for when your running wire in hard to reach areas that your truck or tractor cannot access. There are 5 vertical position adjustment points on the wire unroller that lets you run the wire at the perfect height.
Description
PLEASE NOTE: this item availability fluctuates often.
Barbed Wire Unroller is 2” receiver hitch compatible and used for fencing projects. This all-purpose wire unroller features safety pins that prevent the rod from disconnecting when in use. The wire unroller attachment holds 1 roll up to 80 rod or 1,320 ft of barbed wire and is perfect for running fence lines big or small. The frame is reinforced with a steel gusset and made from square tubing. The wire unroller is designed to fit into your truck’s 2” receiver or on a receiver mount plate attached to your tractor. We also provide an adapter to allow you to bolt to the rear of your ATV for when your running wire in hard to reach areas that your truck or tractor cannot access. There are 5 vertical position adjustment points on the wire unroller that lets you run the wire at the perfect height.
FITS 2” RECEIVERS: This wire unroller is compatible with 2” receivers. Attach the unroller to your truck or connect a receiver mount plate to your tractor and use the attachment to run long lines of barbed wire fencing faster and easier, saving you time and manpower.
BOLT ON ATV ADAPTER INCLUDED: The barbed wire unroller also features a bolt on adapter. Simply slide the adapter onto the receiver hitch and mount to the rear of your ATV. This allows you to run wire in harder to reach areas your truck or tractor cannot.
CAPACITY: The wire unroller can hold up to 1 roll up to 80 rod with a max spool width of 16″. This allows you to run wire up to 1,320 feet long.
POWDER COATED STEEL: The 2” Receiver and ATV Wire Unroller attachment is powder coated. This black powder coating helps protect the unit from rust and corrosion, keeping it looking and performing like new for years to come.
HEAVY DUTY DESIGN: The frame is built with 2” x 2” steel tubing with a steel gusset for reinforcement. The schedule 40 rod is 1” diameter to safely hold large spools of barbed wire. There are 5 vertical position adjustment points on the wire unroller that lets you run the wire at the perfect height.
Barbed Wire Unroller is 2” receiver hitch compatible and used for fencing projects. This all-purpose wire unroller features safety pins that prevent the rod from disconnecting when in use. The wire unroller attachment holds 1 roll up to 80 rod or 1,320 ft of barbed wire and is perfect for running fence lines big or small. The frame is reinforced with a steel gusset and made from square tubing. The wire unroller is designed to fit into your truck’s 2” receiver or on a receiver mount plate attached to your tractor. We also provide an adapter to allow you to bolt to the rear of your ATV for when your running wire in hard to reach areas that your truck or tractor cannot access. There are 5 vertical position adjustment points on the wire unroller that lets you run the wire at the perfect height.
FITS 2” RECEIVERS: This wire unroller is compatible with 2” receivers. Attach the unroller to your truck or connect a receiver mount plate to your tractor and use the attachment to run long lines of barbed wire fencing faster and easier, saving you time and manpower.
BOLT ON ATV ADAPTER INCLUDED: The barbed wire unroller also features a bolt on adapter. Simply slide the adapter onto the receiver hitch and mount to the rear of your ATV. This allows you to run wire in harder to reach areas your truck or tractor cannot.
CAPACITY: The wire unroller can hold up to 1 roll up to 80 rod with a max spool width of 16″. This allows you to run wire up to 1,320 feet long.
POWDER COATED STEEL: The 2” Receiver and ATV Wire Unroller attachment is powder coated. This black powder coating helps protect the unit from rust and corrosion, keeping it looking and performing like new for years to come.
HEAVY DUTY DESIGN: The frame is built with 2” x 2” steel tubing with a steel gusset for reinforcement. The schedule 40 rod is 1” diameter to safely hold large spools of barbed wire. There are 5 vertical position adjustment points on the wire unroller that lets you run the wire at the perfect height.
Features:
– Fits Standard 2” Receivers.
– ATV Bolt-On Adapter Included.
– Holds 1 Roll Up to 80 Rod Or 1,320 ft.
– 5 Height Adjustment Settings.
– Locking Pin Prevents Spool From Disconnecting.
Specifications:
– Weight: 40 LB
– Overall Width: 24”
– Max Spool Width: 16″
– Connection Type: 2” Receiver or ATV with included adapter.
– Fits Standard 2” Receivers.
– ATV Bolt-On Adapter Included.
– Holds 1 Roll Up to 80 Rod Or 1,320 ft.
– 5 Height Adjustment Settings.
– Locking Pin Prevents Spool From Disconnecting.
Specifications:
– Weight: 40 LB
– Overall Width: 24”
– Max Spool Width: 16″
– Connection Type: 2” Receiver or ATV with included adapter.
Additional information
| Weight | 35 lbs |
|---|---|
| Dimensions | 25 × 25 × 25 in |
